Rear axle
Capacity: 1.7 US qts (1.6 liters)
Oil type: API GL-5 (MIL-L-2105 B or C).
Viscosity: SAE 90 or 80W /90.
Replace: at 600-1,200 mile (1,000-2,000 km) service only.
The oil level should be up to the filler plug.
Drain rear axle oil through drain plug.
When the temperature is consistently below 15°F (-10°C) use API GL-5 SAE 80W oil.
pg. 113 Automatic transmission
Automatic transmission oil
Capacity: See "Specifications" section.
Fluid type: Automatic Transmission Fluid type Dexron IID.
Replace: Every 20,000 miles (32,000 km).
CAUTION!
Oil spilled on a hot exhaust pipe constitutes a fire risk.
A Cold transmission: oil temperature= +105°F(+40°C).
This is a normal temperature for the transmission after idling for about 10 minutes. At oil temperature below +105 °F(+40 °C), the level
may be below the MIN mark.
B Warm transmission: oil temperature = +195°F(+90°C).
This temperature is reached after driving for about 30 minutes. At oil temperature above +195 °F(+90 °C), the level may be above the MAX
mark.
Note!
To Next Page
Loading...
