Depress catches and fit new bulb. To fit:
Fit the reflector and check that the light works.
4-door models
Press the cover into position, noting the position of the alignment pin at the top.
Wagons
Align the catches and press the cover into position.
pg. 79 Replacing bulbs
Interior light and reading lights
Take hold of the front section of the light as shown and pull straight down.
Replace the blown bulb and check operation Before reinstating the bulb housing.
Light Power Socket
Interior light 10 W SV8.5
reading light 5 W W2.1 x 9.5d.5
To Next Page
Loading...
