Shift gate
The gear selector can be moved freely between D and 2. Selections of other positions are obtained by
depressing the selector knob prior to moving the selector.
Slightly depressing the selector knob allows selection of positions N, D, 2 and 1.
Fully depressing the selector knob allows selection of positions R and P. This is also necessary when
initially bringing the selector out of position P.
Fully depressing the selector knob thus permits shifting freely between all positions.
4th gear disengagement
The 4th gear is engaged automatically after the transmission has shifted through 1st, 2nd and 3rd gears
at certain speeds and loads. By pressing in the button on the side of the selector lever, 4th gear can be
disengaged, thus providing a three-speed transmission. As a reminder, the
light on the dashboard
glows. By pressing in the button again, the transmission reverts to four-speed operation and the light
shuts off.
Disengage the 4th gear while:
● towing a trailer
● driving in mountainous regions
To Next Page
Loading...
