Volvo 850 User Manual

1996 Volvo 850
Shift gate positions
The gear selector can be moved freely between N and D. Selections of other positions are obtained by
depressing the selector knob prior to moving the selector.
Slightly depressing the selector knob allows selection of positions R, N, D, 3 and L. Fully depressing the
selector knob allows selection of positions P. This is also necessary when initially bringing the selector
out of position P. Fully depressing the selector knob thus permits shifting freely between all positions.
Mode selector
file:///K|/ownersdocs/1996/1996_850/96850_406.htm (5 of 10)12/30/2006 9:59:34 AM

Volvo 850 Specifications

Torque Specifications

ABS Sensor Torque	7 ft. lbs. (10 N.m)
Bearing Cap Torque	18 ft. lbs. (25 N.m)
Lug Nuts Torque	81 ft. lbs. (110 N.m)
Suspension Arm Nuts Torque	13 ft. lbs. (18 N.m)
Suspension Arm To Anti-Roll Bar Torque	37 ft. lbs. (50 N.m)
Suspension Arm To Anti-Roll Bar Center Nut Torque	80 ft. lbs. (120 N.m)