To fit:
Fit the reflector and check that the light works.
Sedan models
Press the cover into position, noting the position of the alignment pin at the top.
Wagon models
Align the catches and press the cover into position.
pg. 6:11 Replacing bulbs (cont.)
Interior light and reading lights
Take hold of the front section of the light as shown and pull straight down.
Replace the blown bulb and check operation before reinstalling the bulb housing.
Bulb Power Socket
Interior light 10W SV8.5
Reading light 5W W2.1x9.5d
file:///K|/ownersdocs/1993/1993_940/93940_6_5.html (10 of 12)12/30/2006 9:44:33 AM
To Next Page
Loading...
