Volvo D20 - Page 30

Group 21 Reconditioning engine
Disassembly
.• ~
28
Remove No. 1 piston with connecting rod
Aemove connecting rod cap and bearing shell.
Push
out piston and connecting rod.
816
Assemble connecting rod, bearing shelis and caps to
prevent interchange
of parts. Notel Casting lugs on
connecting red and caps
must face the same way.
Mark
connecting red-cap.
817
Remove
remaining pistons and connecting rads
as above
Netel Do not interchange bearing she ils .
CRANKSHAFT
818
Remove
crankshaft
Check identification marks on mai n bearing ca pS.
Mark as necessary.
Remove main bearing caps and sheiis.
Lift away crankshaft.
Aemove bearing
shelis from cylinder block.
Notel Do not interchange bearing sheiis.