Need help?Do you have a question about the Volvo D20 and is the answer not in the manual?
General| Displacement | 2.0L |
|---|---|
| Cylinders | 4 |
| Fuel Type | Diesel |
| Fuel System | Common Rail Direct Injection |
| Power Output | 150-190 hp |
| Torque | 350-400 Nm |
Step-by-step instructions for removing external components from the engine block.
Detailed procedure for disassembling the engine's internal and external components.
Procedures for cleaning and inspecting engine components after disassembly.
Step-by-step instructions for reassembling the engine, including torques and specifications.
Procedure for disassembling the cylinder head, including valve and spring removal.
Steps for cleaning and inspecting the cylinder head and its components for wear or damage.
Instructions for assembling the cylinder head, including valve installation and component checks.
Procedure for installing the cylinder head onto the engine block, including gasket and bolt torquing.
Steps for assembling engine components, focusing on timing gear, belts, and valve adjustments.
Final installation steps for engine components like injectors, pumps, and manifolds.
General specifications for the engine, including type designation and serial number.
Details and specifications related to the engine block, including cylinder head measurements.
Critical torque values and procedures for various engine components.
Specifications and details related to the engine's lubricating system.
Specifications for intake and exhaust manifold installation.
Specifications and details related to the engine's cooling system.
Detailed specifications for the lubricating system, including oil pressure and pump.
Specifications and details for the engine's fuel system, including injection timing.
To Next Page
