1 The battery switch is located inside the cabin.
2 Connect the battery by opening the red cover of the battery
disconnect switch (C) and pressing the switch to the lower
position (B).
3 Sound the horn before starting the engine.
Keep an eye on people in the vicinity of the machine.
Ask someone to help by giving signals, if the machine cannot
be moved without risks.
4 Turn the ignition switch to start position (2) and keep it there
until the engine starts. Do not race the engine immediately
after start.
5 The camera view is shown in the IC (Instrument Cluster) at
every machine start, it could be closed with the ESC button.
6 If the machine is equipped with anti-theft protection, see page
67
.
Cold starting, see page
147
.
N
Do not keep the ignition switch in start position (2) for more than
20 seconds, as this may seriously damage the starting system. If
the engine does not start, turn the switch back to OFF position (0)
and wait a couple of minutes before the next starting attempt.
7 Check the travel lights and working lights. If a travel alarm is
installed, check this function.
8 Warm up the machine, see page
150
.
A
B
C
V1149247
Battery disconnect switch
A OFF position
B ON position
C Battery disconnect switch