Volvo MB10A - Tightening Torques and Belt Tension

14
Renoveringsdata/Overhaul data
Åtdragningsmoment/Tightening torques
Cylinderlocksskruvar............................................ 83 Nm (8,3 kpm) (60 lb.ft.)
Cylinder head screws
Vevlagermuttrar ................................................... 55 Nm (5,5 kpm) (40 lb.ft.)
Big-end bearing nuts
Vevlagermuttrar* .................................................. 75 Nm (7,5 kpm) (55 lb.ft.)
Big-end bearing nuts*
Svänghjulsmutter ................................................. 380 Nm (38 kpm) (275 lb.ft.)
Flywheel nut
Tändstift .............................................................. 38 Nm (3,8 kpm) (27,5 lb.ft.)
Spark plugs
* Gäller från motor nr 2779.
* Valid from engine No. 2779.
Åtdragningsschema för cylinderlocksskruvar
Tightening sequence for cylinder head screws
Remspänning/Belt tension
Startgenerator–svänghjul...................................... 4 mm (0.158 in.) med normalt tumtryck
Starter generator–flywheel............................... 4 mm (0.158 in.)