AUDIO AND MEDIA
}}
* Option/accessory.
39
A list of pre-selected channels can be shown in
the display screen.
–
To activate/deactivate, in the normal view for
the AM/FM source, press OK/MENU and
select
Show Presets.
Digital radio (DAB)*
10 presets can be stored per wavelength. Stor-
age of presets is performed by means of a long
press on the desired preset button, for more
information see AM/FM radio above. The stored
presets are selected using the preset buttons.
A preset contains one channel but no subchan-
nels. If a subchannel is being played and a preset
is saved then only the main channel is registered.
This is because subchannels are temporary. At
the next attempt to retrieve the preset, the chan-
nel which contained the subchannel will be
played. The preset is not dependent on the chan-
nel list.
A list of pre-selected channels can be shown in
the display screen.
–
To activate/deactivate, in the normal view for
the DAB source, press OK/MENU and
select
Show Presets.
NOTE
The audio system's DAB system does not
support all functions in the DAB standard.
Radio Data System functions (RDS)
With RDS the radio can automatically change to
the strongest transmitter. RDS provides the
facility to receive e.g. traffic information (TP) and
to search for certain programme types (PTY).
RDS links FM transmitters into a network. An FM
transmitter in such a network sends information
that gives an RDS radio the following functions:
•
Automatically switches to a stronger trans-
mitter if reception in the area is poor
7
.
•
Search for programme category, e.g. pro-
gramme types
8
or traffic information.
•
Reception of text information on current
radio programme
9
.
NOTE
Some radio stations do not use RDS or only
selected parts of its functionality.
If a required programme type is located the radio
can switch stations interrupting the audio source
currently in use. For example, if the CD player is
in use, it is paused. The interrupting transmission
is played back at a preset volume. The radio
returns to the previous audio source and volume
when the set programme type is no longer broad-
cast.
The programme functions alarm, traffic informa-
tion (TP) and programme types (PTY) interrupt
one another in order of priority, where alarm has
the highest priority and programme types has the
lowest. Press OK/MENU to return to the inter-
rupted audio source and still listen to the mes-
sage. Press EXIT in order to cancel the message
and return to the interrupted audio source.
To Next Page
Loading...