Vonets VAP11S - Page 8

VONETS——WiFi Bridge/Repeater/Router
5
will not transmit the corresponding hotspot and can only be used as a bridge application;
⚫ Advanced Setting,include Hot spot authentication match mode, WiFi Signal Motion
Detection and SSA Signal strength alarm threshold,these options here can be kept
unchanged, for instructions on this option, go to www.vonets.com and download the “V
Series WiFi Bridge Advanced Features Instruction”;
5. Click “Reboot”, VONETS device will connect to the configured WiFi hotspot automatically,
if connection is successful, the WiFi LED light will flash quickly;
Remark 1:
LED Light Form
Model
Blue Light
Green Light
Yellow Light
VAP11S
WiFi Connection
Status Light
/
Ethernet Cable Connection
Status Light
VAP11S-5G
System Status Light
WiFi Connection Status
Light
① VONETS device is not connected to any hotspot, WiFi connection status light will flash
quickly;