VooPoo VMATE - Coil Cooling Value and Attention; Coil Cooling Value Adjustment; Important Usage Precautions

M. Tips：
a. Charging rate: 3H (Requirement: 5V 2A
supply only).
b. Accommodaon coefficient of the TC
wire:
Ni: 6000~7000 Standard Default Value: 6500
Adjusng Rate: Short me press:1, long
me press: 10
Ti: 3500~4500 Standard Default Value: 4000
Adjusng Rate: Short me press:1, long
me press: 10
SS: 1000~1600 Standard Default Value: 1300
Adjusng Rate: Short me press:1, long
me press: 10
NC: 200~600 Standard Default Value: 400
Adjusng Rate: Short me press:1, long
me press: 10
TC: 100~7000 Standard Default Value: 1000
Adjusng Rate: Short me press:1,
long me press: 10
Aenon:
1) The higher coil coefficient you set, the
higher coil temperature you get.
2) Because of the different material for the
wire, you may feel the power is not strong
enough when vaping, you can properly
adjust the coil coefficient at a higher rate
to get a beer vape experience.
3) Please adjust the coil coefficient at a low
rate, if too high there is a risk of firing
coon.
C. Coil cooling value: 0.05～1.50Ω, adjusng
rate: 0.01Ω. This funcon is only available
under temperature control mode.
Aenon:
a. Before use please carefully read the user
manual.
b. Please keep device away from heat, fire and
water.
c. Please do not drop, throw or immerse the
device in water as the out shell or inner
components may be damaged.
11