VooPoo VMATE - Operating Instructions; Power On;Off and Mode Switching; TC Mode Operation and Wattage Adjustment

Operang Instrucons:
A. How to turn on/off:
Press the fire buon 5 mes rapidly.
B. How to switch between Power and
Temperature modes:
Press the fire buon 3 mes rapidly to
rotate between modes. (W→SS316→
Ni200→Ti).
C. TC mode operang instrucons:
When the temperature seng is at
100°C, keep pressing down buon, it will
turn to be 600℉.
When the temperature seng is at 200
℉, keep pressing down buon, it will
turn to be 315°C.
Adjustment rate: 1
To adjust waage while in TC Mode, press
fire buon 4 mes rapidly to acvate
waage adjustment. You will see the “W”
waage icon flashing. The waage can be
adjusted from 10W to 80W.
D. Adjust the waage:
Adjust the waage from 5w to 200w.
Adjusng rate: Short me Press: 0.1, Long
me press: 0.5.
3