VooPoo VMATE - Status Indicators and TC Wire Coefficients; Device Status Indicators; TC Wire Coefficient Accommodation

K. Adding, removing or changing
temperature control coil types using the
Voopoo Firmware.
(Default: SS316,Ni200,TI) You can select 1
to 5 types. Coil coefficient seng and
selecng Serial coil mark coefficient select
CHECK BATTERY ATOMIZER SHORT
CHECK ATOMIZER HIGH ATOMIZER
TEMP HIGH LOCK
OFF UNLOCK
M. Tips：
a. Charging rate: 3H (Requirement: 5V 2A
supply only).
b. Accommodaon coefficient of the TC
wire:
Ni: 6000~7000 Standard Default Value: 6500
Adjusng Rate: Short me press:1, long
me press: 10
Ti: 3500~4500 Standard Default Value: 4000
Adjusng Rate: Short me press:1, long
me press: 10
SS: 1000~1600 Standard Default Value: 1300
Adjusng Rate: Short me press:1, long
me press: 10
NC: 200~600 Standard Default Value: 400
Adjusng Rate: Short me press:1, long
me press: 10
TC: 100~7000 Standard Default Value: 1000
Adjusng Rate: Short me press:1,
10