VA10800/VA10820 Evaluation Board User’s Manual
V3.0
4
Table 1 - REB1 Connector designations
1.5 Materials List
• REB1 evaluation board – Programmed with demonstration program
• 36” Micro USB cable
• Insert card with component placement picture and URL
• 7 jumpers.
1.6 Support
Email: info@voragotech.com Reference REB1 in the email title.
2 Software Setup
Three sets of software will be working in concert:
- Integrated Development Environment (IDE) {Either Keil, IAR or iSystem},
- Segger J-Link RTT viewer and
- Embedded code running on the VA108x0 processor.
The IDE allows code to be developed, compiled, debugged and programmed to an SPI EEPROM
on the board. The J-Link RTT Viewer allows terminal communication between the PC and the
VA108x0 MCU. Keys pressed on the keyboard can be routed to the VA108x0 MCU and printf
To Next Page
Loading...
