10 English
1. Unplug humidier and place on level surface, such as oor.
Note: Spills can occur during cleaning, moving or relling Water Tank,
so be careful to avoid spills when doing these activities.
2. Remove Water Tank by grasping recessed handle and pulling
toward you (A).
3. Turn Water Tank upside down and remove Cap (B).
4. Fill Water Tank with cool tap water (C).
5. Ensure Gasket (rubber ring around Cap) is properly positioned
and replace Cap. Some downward pressure may be needed to
compress Gasket prior to rotating Cap 1/4 turn clockwise.
6. Lower Water Tank into Base, positioning Water Tank over raised
bump in Base (D). Once in nested position, water outlet valve inside
Cap opens, releasing water into Base.
FILLING WATER TANK
This humidier has a 1.5-gallon capacity and 2.6-gallon output in
24 hours (if set to High Fan Speed, Continuous Humidity setting).
C
A B
D
²²
To Next Page
Loading...
