Vortex Ranger 1500 - Basic Operation; Install Battery; Power Up; Focus Adjustment

5 4
1500
Rangef inder
Lanyard
Attachment
Sockets
Measure Button
Adjust
Focus with
Eyecup
Battery
Compartment
Utility Clip
(Attaches to Either Side)
Menu Button
Basic OperatiOn
Install Battery
Open the battery
compartment and
install the CR2
battery included
with the Ranger
1500.
Power Up
Once you install the battery, the Ranger 1500 is in
Ready Condition—the normal power-off condition
when not ranging. To power up the Ranger 1500
from Ready Condition and prepare for ranging, press
and release the Measure button. The HCD or
LOS ranging screen will display. The Ranger
1500 will power down automatically after ten
seconds of non-use.
Focus
Turn the eyecup in or out until image is
sharp.
Battery
Power Indicator
Remove battery
compartment cover.
Install battery with
positive side facing
outwards.
+
–