VIPER
®
HD 3000
14 15
Brightness Selection
Choose Between Five Brightness Settings
The Viper
®
HD 3000 provides five
brightness settings. Press the
“Measure” button to toggle through
the five brightness settings. Press
the “Menu” button to save your
desired setting and move to the
Auto-Shutoff selection screen.
Auto-Shutoff
The Viper
®
HD 3000 provides 3
auto-shut off program options:
15 seconds, 30 seconds, or 60
seconds. Press the “Measure”
button to toggle through the
different auto-shutoff times. Press
the “Menu” button to save your
desired setting.
Note: If HCD mode was selected, pressing the “Menu” button will
move back to Ranging Mode Selection.
TARGETING MODE EXPLANATIONS
The Viper
®
HD 3000 provides four target modes:
Normal Mode, First Mode, Last Mode, and Extended
Laser Range (ELR) Mode.
Normal Mode
Your Viper
®
HD 3000 comes preset to Normal Mode.
This is the standard mode providing the targets range
with the strongest range result. Normal Mode is the
recommended target mode for most situations.
First Mode
This mode displays the closest
distance when ranging. This mode
is ideal for ranging a smaller target
in front of other larger or more
reflective objects.
Note: If unsure about the range, simply
range again.
Range captured
To Next Page
Loading...
