Package contents
The following items should be included in your order of the MicroFogger 5 starter kit:
-MicroFogger 5 Pro
-Fog liquid bottle
-Remote control
-USB charging cable
If you’ve purchased the Ultimate kit, the following additional items are included:
-Additional bottle of fog liquid
-Hose adapter
-LocLine adapter
-LocLine tubing
-Rake attachment
-Circular diffuser
-Liquid fog attachment
-2 spare V5 coils
-Tank disassembly tool
-Spare battery in safety case
-Carry case with foam insert
Additional features
The MicroFogger 5 Pro supports several additional features that’ll make it easier for you
to incorporate it into your own custom projects should you decide to do so. Please note
that although these modifications are officially supported, you will void your
MicroFogger’s warranty should you decide to proceed since there is a potential to
damage the internal electronics if you are not careful. While the following guide will
detail each step to make the process as easy as possible, we still advise that you only
attempt these modifications if you believe you have sufficient technical knowledge.
Proceed at your own risk
Wired manual control
The MicroFogger can be triggered via its USB port to allow for automated control or to
let you reliably activate it over long distances where the remote control may be
unsuitable. This can be done by simply connecting the two data pins (pins 3 and 4) of
the USB-C port together. To access these pins, you’ll need to get one of our control
cable break boards. Using the diagram on the back of the breakout board, connect your
switch or relay to the two pins on either side of the button symbol. You will need to turn
the control cable setting ON in order to allow the cable to work.
To Next Page
Loading...