VOX electronics PIO 650 2MW User Manual

14
Drilling the Hanger Holes
Make holes with Ø4 mm diameter on the points
marked as A, B, C, D on the mounting scheme.
Figure 2
The appliance should be mounted on the cab-
inet on the points A, B, C, D by using 4 x 40
screws provided with the appliance. The front
panel should not be rubbed against the cabinet
cover when the sliding set moves. Figure 3
Place the plastic ue provided with the appli-
ance on the ue outlet on the appliance. Rotate
the plastic ue clockwise. Figure 4
Install exible aluminium pipe to
plastic ue outlet. Install the other
end of the pipe to the ue hole on
the wall.Figure 5
A ATTENTION
Since twists and bends in the aluminium pipe
will lead to reduction in the air suction power,
avoid using twists and bends as much as pos-
sible.
Functions of Device
Cooker hood is used in kitchens with or without
ue.
In case of use with ue;
In ue-connected use, cooker hood must be
connected to a ue that will discharge the air.
Prefer the shortest way for the pipe system that
leads to ue, in order to get the maximum ef-
ciency from your cooker hood. Your product is
manufactured in a form appropriate for use with
ue.
7 ASSEMBLY OF PRODUCT
B
A
D
C
Ø4
A,B,C,D =
520
500
19
10
10
2
10
462±2
305
283
223±2
248
50
Ø
1
3
0
±
2
28
MOUNTING TEMPLATE SCALE 1:1
SAGOMA DI MONTAGGIO RELAZIONE 1:1
ESTAMPA DE MONTAJE ESCALA 1:1
GABARIT POUR MONTAGE ECHELLE 1:1
MONTAGESCHABLONE MAßSTAB 1:1
AUSSCHNITT IM SCHRANK FÜR LUFTAUSTRITT
LINEA DI TAGLIO PER USCITA ARIA
RECORTE DELARMARIO PARA LA SALIDADE AIRE
LIGNE A COUPER POUR LASORTIE D'AIR
CUT-OUT LINE ON CUPBOARD FORAIR EXIT
SZABLON MONTAZOWY SKALA1:1
ZAZNACZYC W SZAFCE OTWÓR POD WYLOT POWIETRZA
80
Figure 2
B
C
D
A
A
B
C
D
Figure 3
1
2
Figure 4
Figure 5

VOX electronics PIO 650 2MW Specifications

General

Brand	VOX electronics
Model	PIO 650 2MW
Category	Ventilation Hood
Language	English