EasyManuals Logo

VOX electronics PIO 650 2MW User Manual

VOX electronics PIO 650 2MW
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
15
8 USE OF PRODUCT
3 Spd Rocker Switch
Lamp Switch
Turn the switch to lamp position to
turn on the light of the appliance.
The sliding set must be detached to
turn on lights.
3. Circulation Switch
If you want to run the appliance at
the third speed move the switch
down.
3. Circulation Switch
If you want to run the appliance at
the third speed move the switch
down.
2 Spd Rocker Switch
The product has 2 lamps and a switch to
control lighting. The sliding set
must be detached to turn on
lights.
3 Spd Dgt Switch
1- Press this button when you want to operate
the product in speed 1.
2- Press this button when you want to operate
the product in speed 2.
3- Press this button when you want to operate
the product in speed 3.
4- Press this button when you want to turn on
the product lights.
Speed Selection
Appliance has is a 3-level ventilation. One of
the low-medium-high ventilation levels is se-
lected according to cooking and frying vapour. It
is started by pressing the motor control buttons
on the front panel. Electronic controlled models
have automatic timer.
Timer
If you press any of the motor starting buttons
for longer than 2 seconds, a timer function shall
activate with 15 minutes duration. Display shall
also give a signal when the timer starts and the
motor shall stop automatically 15 minutes later.
Cleaning Periods of the Metal Filter:
The lters must be cleaned when "C" signal
appears on the display or (depending on us-
age) after every 2-3 weeks. When the lters
are cleaned and mounted in their places, press
button ( ) for more than 3 seconds in order to
delete "C" signal (when the product is inactive).
Letter "E" will appear on the display, and the
product will switch to normal operation. If the
operation is desired to continue without delet-
ing "C" signal, when you push on ( ) button,
active operation will be observed for 1 sec. and
then "C" signal will reappear and the motor will
continue to run.
A ATTENTION
"C" mark will appear at the end of the product's
usage period of 60 hours.
1
23
4
5
1
23
4
5
1
23
4
5

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the VOX electronics PIO 650 2MW and is the answer not in the manual?

VOX electronics PIO 650 2MW Specifications

General IconGeneral
BrandVOX electronics
ModelPIO 650 2MW
CategoryVentilation Hood
LanguageEnglish

Related product manuals