VOX electronics PIO 650 2MW User Manual

19
10.1 Potential Failures and Solutions
Description of Failure Reason Help
Appliance Does Not Work.
Check the power
connection.
Mains voltage must be 220-240 V, and
product must be plugged into a grounded
socket.
Lighting Lamp Does Not
Operate.
Check the power
connection.
Mains voltage must be 220-240 V, and
product must be plugged into a grounded
socket.
Lighting Lamp Does Not
Operate.
Check the power
connection.
Lamp switch must be at "on" position.
Lighting Lamp Does Not
Operate.
Check the bulbs. Bulbs must be operative.
Product's Air Intake is Weak.
Check the alumin-
ium
lter.
The aluminium cartridge lter should
be washed once a month under normal
conditions.
Product's Air Intake is Weak.
Check the air
outlet ue.
Air Outlet Flue Must Be Open.
Product's Air Intake is Weak.
Check the carbon
lter.
In products that work with carbon lters,
carbon lter must be replaced once in
every 3 months under normal conditions.
It Does Not Discharge Air (in
ueless use)
Check the Alumin-
ium
lter.
The aluminium cartridge lter should
be washed once a month under normal
conditions.
It Does Not Discharge Air (in
ueless use)
Check the carbon
lter.
In products that work with carbon lters,
carbon lter must be replaced once in
every 3 months under normal conditions.
10.2 Technical Table
Supply Voltage 220 - 240 V 50Hz
Insulation Class of Motor F
Insulation Class CLASS I

VOX electronics PIO 650 2MW Specifications

General

Brand	VOX electronics
Model	PIO 650 2MW
Category	Ventilation Hood
Language	English