7
A DANGER
2.4 Danger of burn, danger of elec-
tric shock!
■ Allow the appliance to cool before cleaning
or maintenance process. Switch off the fuse or
pull out the mains plug from the socket.
■ There is risk of damage due to ingress of
moisture in the electronics. Do not clean the
control components with a wet cloth.
■ The surface could be damaged due to a
wrong cleaning process. Clean stainless steel
surfaces only in their brushing direction. Do not
use a stainless steel cleaner for the control ele-
ments.
■ The surface could be damaged due to ag-
gressive and abrasive cleaning agents. Never
use aggressive and abrasive cleaning agents.
■ There is risk of damage due to backow of
condensate. Mount the air outlet channel down-
wards from the appliance (slope of 1°).
A DANGER
2.5 Dangers of re and physical
injury!
In case of repairing that is not performed accord-
ing to the rules or as required, turn off the fuse
or unplug the feeder cable of your appliance.
Repairing must be performed only by the autho-
rized technical service or authorized experts.
NOTE
If the appliance is faulty or damages, turn off the
fuse or unplug the feeder cable of your appliance
and call the authorized service.
NOTE
If the feeder cable is damaged, it must be
replaced by its manufacturer or its authorized
technical service or any other personnel
qualied at the same level, in order to avoid any
dangerous situation.
NOTE
If the bulbs of your appliance are faulty, turn
off the fuse or unplug the feeder cable of your
appliance. Replace the bulbs immediately to
avoid overload on other bulbs (wait for the bulbs
to cool down rst)
A ATTENTION
Accessible components might be heated when
used with cooking devices.
A DANGER
Air outlet pipe of this appliance mustn't be con-
nected in the ue used to discharge the fume
generated by devices that use gas or other fuels.
To Next Page
Loading...
Need help?
General
