7
12. MORE: This switch engages an additional 14dB volume boost, excellent for making
your leads stand out in the mix.
Battery compartment: This is where you can access the 9V battery.
Changing the battery
1. Open the battery case on the bottom of the
pedal and remove the 9V battery (6F22).
2. Remove the battery snap from the 9V battery.
3. Install a new battery onto the snap and put the
battery back into the case.
4. Close the battery case.
Note: Remove the 9V battery from the pedal
when not using it for long time periods.
To Next Page
Loading...
