Vox StompLab IIB

2012

Vox StompLab IIB Specifications

General

USB	Yes
Effects Types	Distortion, Overdrive, Modulation, Delay, Reverb, EQ
Number of Effects	100
Presets	100
Amp Models	16
Input	1/4" Jack
Output	1/4" Jack
Power Supply	9V DC adapter

Summary

Precautions and Safety Warnings

Safe Location and Power Supply

Foreign Matter Prevention

Keeping liquids away from the equipment to prevent breakdown, fire, or electrical shock.

Front and Rear Panel Controls

Front Panel Control Overview

Explanation of the front panel buttons, knobs, and displays.

Additional Front Panel Controls

Rear Panel Jacks

Setup and Basic Connections

Installing Batteries

Basic Connections Guide

Program Select Mode Operations

Selecting Programs

Program Selection Steps

Expression Pedal Configuration

Assigning Parameters to Pedal

Steps to assign effect parameters to the expression pedal.

Assigning Volume to Pedal

Setting Parameter Range

Adjusting the minimum/maximum range for expression pedal control.

Saving Pedal Settings

Bypass and Mute Functions

Bypassing and Muting

How to bypass all effects or mute the output for tuning or switching.

Sound Creation and Editing

Tuning Procedure and Calibration

Edit Mode Overview

Introduction to Edit mode for creating custom sounds and signal flow.

Effect Parameter Adjustment

Adjusting effect parameters using knobs and notes on specific effects.

Saving Custom Programs

Writing Custom Sounds

Step-by-step guide to save created sounds to program locations.

Cancelling and Overwriting

Expression Pedal Sensitivity Adjustment

Optimizing Pedal Performance

Adjusting sensitivity for optimal reach of min/max parameter values.

Adjustment Procedure

Step-by-step guide to calibrate expression pedal sensitivity.

Troubleshooting Common Issues

Restoring Factory Programs

Power and Sound Issues

Troubleshooting steps for power not turning on or no/distorted sound.

Effect and Distortion Problems