Vox Tonelab EX User Manual

Using the unit in specific locations can result in malfunction.

Connect the designated AC adapter to an AC outlet of the correct voltage.

Radios and televisions may experience interference; operate at a suitable distance.

Avoid breakage and clean with a dry cloth; avoid liquid cleaners.

Never set liquid near equipment; prevent metal objects from entering.

Equipment tested and found to comply with FCC limits for Class B digital devices.

Dispose of product, manual, package, or battery in an approved manner.

Verify product is intended for use in the country of residence to avoid danger and warranty invalidation.

Details the ToneLab EX's key features including Valvetronix technology, amp/cab models, effects, and USB interface.

Introduces the switches, controls, and connections on the ToneLab EX's top panel.

Details the CABINET ON/OFF, STAND ALONE PEDALS, AMP/PEDAL selectors, and tone controls.

Explains the GAIN, TREBLE, MIDDLE, BASS, and REVERB controls and their functions.

Explains the BANK UP/DOWN pedals for program bank selection.

Details program 1-4 pedals/LEDs, tuner LEDs, and speaker output.

Describes the controls for the Pedal 1 section.

Details Pedal 2 and Modulation section controls and functions.

Explains Modulation selectors, EDIT knobs, TAP switches, and Delay section controls.

Covers setting displays, switches, and expression pedal operation.

Details all connectors and controls located on the rear panel of the ToneLab EX.

Explains how to set the AMP/LINE switch for different output destinations (AMP, LINE).

Guides through connecting audio, power, and powering on the unit.

Introduces Program Select and Stomp Box modes for performance.

Explains how to select programs and toggle effects in Stomp Box Mode.

Guides through turning off effects, selecting amp models, and adjusting tone controls.

Details adding effects like delay, saving sounds, and understanding parameter value indication.

Explains how to adjust the MIDDLE control for noise reduction sensitivity.

Details using the BASS, REVERB, and VOLUME controls for Total Equalizer settings.

Guides on how to save edited sounds as user programs using the WRITE switch.

Illustrates signal flow and introduces details on amp, cabinet, and effect models.

Provides descriptions for TWEED 1x8, TWEED 1x12, TWEED 4x10, BLACK 2x10, BLACK 2x12, and VOX AC15 cabinets.

Details VOX AC30, VOX AD120VTX, UK H30 4x12, UK T75 4x12, and US V30 4x12 cabinets.

Suggests typical combinations of amp and cabinet models for various sounds.

Describes TONE DRIVE, BRIT LEAD, FAT DIST, METAL DIST, and ROCK PLANET stand alone pedal models.

Details TUBE DX, BIG FUZZ, VOX TONE BENDER, OCTA FUZZ, TECHNO FUZZ, and CRUSHER pedal models.

Explains COMP, VOX V847, TONE, and ENERGIZER effects for Pedal 1.

Describes VOX V845, BRN OCTAVE, ACOUSTIC, RING MOD, and U-VIBE pedals for Pedal 2.

Details CLASSIC +, TUBE OD, BLUE DRIVER, GOLD DRIVE, ORG DIST, and GERMANIUM FUZZ pedals.

Introduces modulation effects and how to adjust SPEED and other parameters.

Describes CE CHORUS, MULTI CHORUS, FLANGER, ORG PHASE, and TWIN TREM modulation effects.

Details VIBRATO, G4 ROTARY, SLOW ATTACK, PITCH, FILTRON, and TALK MOD modulation effects.

Introduces delay types and describes ANALOG, TAPE ECHO, and SDD DELAY.

Details MULTI DELAY and introduces the three reverb types: SPRING, ROOM, HALL.

Provides descriptions for SPRING, ROOM, and HALL reverb types.

Provides descriptions for SPRING, ROOM, and HALL reverb types.

Explains how to use the built-in auto chromatic tuner, including bypass and muted tuning.

Details switching between Normal/Strobe modes and calibrating the tuner's reference pitch.

Explains how programs assign functions to the expression pedal and how settings are saved.

Details how to assign effect parameters or input levels to the expression pedal using Quick Assign.

Explains how to adjust the minimum and maximum values for parameters assigned to the expression pedal.

Guides on adjusting expression pedal sensitivity for optimal performance when parameters are assigned.

Explains installing and using librarian software for program management via USB.

Details recording and monitoring audio via the ToneLab EX using a USB connection.

Provides steps to restore the ToneLab EX to its original factory-set state.

Addresses common problems like no power, no sound, and potential causes.

Covers issues where effects don't apply, sound is distorted, or controls have no effect.

Lists preset song titles organized by bank and program number.

Lists key technical details including amp/cabinet models, pedal types, connections, and dimensions.