Vox Tonelab EX - Tuning Modes and Calibration

27
6. VIBRATO
Thisvibratoeffectaddscyclicalpitchchanges, creatinga
widerangeofvibratofromamildwarblingtocricketchirps
tosomethingfastandfuriouslikeanelectricshock.Withthis
effectyoucan,for example,assignthe“DEPTH”parameter
totheexpressionpedalandapplytheeffectatkeypointsdur‐
ingyourperformance.
Knob/Switch Parameter
EDIT DEPTH* Adjusts the modulation depth.
TAP SPEED*
Adjusts the modulation speed in a range of
1.0–30 Hz.
TAP+E
DIT SPEED* Adjusts the speed.
7. G4 ROTARY
Thismodelsarotaryspeaker.
Knob/Switch Parameter
EDIT DEPTH* Adjusts the modulation depth.
TAP SPEED*
Adjusts the modulation speed in a range of
0.8–15 Hz.
TAP+E
DIT SPEED* Adjusts the speed.
8. SLOW ATTACK
Thiscreatesaviolin‐likeslow
andgentleattack.
Knob/Switch Parameter
EDIT ATTACK* Adjusts the speed.
9. PITCH
Thisisapitchshifterthat allowsyoutoplaychor
ds,andhas
avariablerangeofoneoctaveupwardordownward.
Knob/Switch Parameter
EDIT BALANCE*
Adjusts the balance between direct sound
and effect sound.
TA
P PITCH*
Specifies the amount by which the pitch of
the eff
ect sound will be shifted; an octave, a
4th, or a 5th. Each time you press the
switch, the setting will cycle between -12, -7,
-5, DT (Detune), +5, +7, +12, -12.
TAP+EDIT PITCH*
Specifies the amount by which the pitch of the
effect sound will be shifted in semitone units
(100 cents). The setting will change as follows:
-12, -11– -1, 0, DT (Detune), +1– +12
10.FILTRON
Thisisanenvelope‐controlled filter (wah)
thatopensor
closesafilteraccordingtotheinputfromtheguitar.
Knob/Switch Parameter
EDIT SENS*
Adjusts the sensitivity to the guitar's volume. 
If this parameter is assigned to the
expression pedal,
the cutoff frequency will
be controlled by the expression pedal,
meaning that the opening/closing of the filter
will not be affected by the input from the
guitar.
TAP TYPE
Specifies the direction of movement (up or
do
wn). 
If Up is selected, the T
AP switch LED will
l
ight-up.
TAP
+EDIT RESONANCE* Adjusts the amount of resonance.