Vox Tonelab EX - Creating Your Own Sounds; Creating a Sound from Scratch

12
Creating your own sounds
Creating a sound
Therearetwowaystocreateyourown sound:youcan start
withaprogramthat’ssimilartowhatyouhaveinmindand
thenedittheparameter sasdesired,oryoucancreateapr o‐
gramfromscratch.
Herewe’llexplainhow
tocreateaprogramfromscratch
.
1. Turnoffthecabinetmode
landeffecttypes.
IftheCABINET,PEDAL1,PEDAL2,MODULATION,
andDELAYLEDsarelit,presscorrespondingswitchesto
turnthemoff.SettheREVERBknobtotheoffposition.
2. PresstheAMPSbankselectswitchtoselectabank,and
usetheAMPS/STANDALONEPEDALSselectorto
selectanampmodel.
Eachtimeyo
upresstheAMPSbankswitch,thebankwill
cy
clethroughSTANDARD,SPECIAL,CUSTOM,STAN‐
DARD...
Fordetailsontheampmodels,refe rto“A m p models”(p.15) .
3. UsetheGAIN,TREBLE,MIDDLE,BASS,andVOLU
ME
controlstoadjustthetoneandvolume.
TheGAINcontroladjust
sthegain.
TheTREBLE,MIDDLE,andBA
SScontrolsadjustthehigh,
mid,andlow‐frequencytone.
TheVOLUMEcontroladjuststhevolume.
HINT: Thesoundmightbedistortedinanundesirableway
dependingonthesettingsoftheTREBLE,MIDDLE,
orBASScontrols,ordependi n gonother settings.If
so,adjusttheVOLUMEcontroltoanappropriate
volume.
4. Ifdes
ired,selectacabinetmo
delandadjustthehigh‐fre‐
quencytone.
To turn the cabinet model on
PresstheCABINETon/offswitch.TheLEDwilllight.
To change the cabinet mode
HolddowntheCABINETon/offswitchforaboutonesec‐
ondtoenterOPTIONparametersettingmode(theCABI‐
NETon/off switchLEDwillblink).The nturnth
eGAIN
control.
Fordetailsonthecabinetmodels,referto “Cab inet mod‐
els”(p.20).