Vox Tonelab EX - Program Select and Stomp Box Modes

11
Program Select Mode
Thismodeenablesyoutoselectandplayprograms.
Whenyo u powerthe Tone
LabEX on, it automatically
engagesthismode,andtheBank/Val uedisplayindicatesa
banknumber.
Use the BANK UP, BANK DOWN, and Program 1–4 pedals
to
select a p
rogram.
Forex
ample,toselectprogr
am3‐1(Bank3,Program1),press
theBANKUP/D OWNpedalstoselect “3” on theBankdis‐
play,thenpresstheProgram1pedaltolighttheLED.
Yo
ucanpresstheProgram1–4pedalstosel ectprogramsin
thesamebank.If yo u wa nttoselectaprogram in other
banks,presstheBANKUP/DOWNpedalstoselectabank,
thenpresstheProgram1–4pedalstoselectaprogram.
Eachprogra
mcontainssettingsthatassign theexpres
sion
pedaltocontrolwah,volume,delayfeedback,reverbinput
level,orsomeothereffectpar ameter.Usetheexpression
pedaltotryouttheassignedparameterforeachprogram.
Stomp Box Mode
Thismodeenablesyoutoturntheeffectsthatareassignedto
thecurrentlyselectedprogramonoroff.
InProgramSelectMode,pressboththeBANKUPandBANK
DOWNpedalssimultaneouslyforonesecond,TheBank/Value
displayindicates“
”andStompBoxModeisengaged.
Eacheffecton/offisassignedtothefollowingpedals:
Effect Pedal and LED
STAND ALONE PEDALS/AMPS BANK UP
PEDAL 1 BANK DOWN
PEDAL 2 Program 1
MODULATION Program 2
DELAY Program 3
REVERB Program 4
Forexample,ifthe Program1LEDislit, the Pedal2effectis
on.PressingtheProgram1pedalwillturn thePedal2effect
off,andtheProgram1LEDwillbecomedark.
Inthesameway,ifthe
AM PSbankselectLEDislit,theamp
modelison.Pres sing the BANK UPpedalwill turntheamp
modeloff,andtheAMPSbankselectLEDwillbecomedark.
Saving the effect on/off status as a program
Theeffecton/offstatusinStomp Box Mode will remain
unchangedwhenyo
uswitchtoProgramSelectMode.How‐
ever,ifyouselectotherprograms,orpowerthe
ToneLabEX
offafteryouswitchtoProgramSelectMode,theeditedeffect
on/offstatuswillbecancelledandwillreverttoitsinitialset‐
tingfortheprogram.
Ifyo
uwa n ttosavetheeffe
cton/offstatusinStompBox
Modetoaprogram,youmustsavethesettingbypressingthe
WRITEswitch.
Fordetails,referto“Savingaprogram”(p.15).