S60
53
ENGLISH
PART NAMES AND FUNCTIONS
1. Track knob
This knob has three functions.
1) The knob is used to select a track. Turning TRACK knob will forward/backward skip to next track.
2) Holding down and turning TRACK knob will rapidly forward/backward skip through the tracks by 10 tracks per
click.
3) Press TRACK knob to switch File name/ Title (ID3)/ Artist (ID3)/ Album (ID3)/ Genre (ID3) on the display screen.
2. Loop In / Real-time Cue / Hot loop button
This function allows you to set a cue point without music interruption. This button also sets the starting point of
a seamless loop. During loop playback, press this button to start over the loop playback. What we called HOT
LOOP function. Repeatedly press the IN button to create a stuttering effect.
3. Loop Out button
This button is used to set the ending point of a loop. A loop is started by pressing the IN button, pressing the
OUT button set the loop ending point. The loop will continue to play until the RELOOP/EXIT button
is pressed.
During loop playback, press the LOOP OUT button. The display will show the loop-out point time, and the LOOP
OUT button will flash, while the LOOP IN button indicator turns off. Rotate the JOG WHEEL to adjust the loop out
point. Press LOOP OUT button again to save the new out point and exit the adjust mode.
4. Reloop/Exit button
If a Seamless Loop has been made, but the player is not actively in seamless loop mode, pressing the RELOOP/
EXIT button will instantly reactivate the seamless loop mode. To exit loop, press the button again. RELOOP will
appear in the VFD display when the RELOOP function is available.
During play mode, pressing the RELOOP button will instantly return play to the last set loop without interrupting
playback.
5. Folder Search knob
If a USB driver is divided into folders, change directly into these folders use the FOLDER Search Knob. Turn the
knob to search the desired folder.
6. Source Select button
Use this button to switch between the two media modes - USB1/USB2.
7. Pitch On/Off button
This button is used to turn the PITCH SLIDER function on and off.
8. Tempo Control Range Selector button
Each time this button is pressed, the tempo adjust slider’s variable range alternates between ±6%, ±10%, ±16%,
and -100%.
9. Key Lock button
This function allows the tempo or BPM of the music to be altered without affecting the musical key. While this
button is illuminated, the key will be locked at zero.
To Next Page
Loading...