54
ENGLISH
PART NAMES AND FUNCTIONS
10. Tempo Adjust slider
This slider is used to adjust the playback pitch percentage.
11. Pitch Bend +/- button
The desired pitch decrease or increase when button is pressing and returns to the original pitch when the button
is released.
12. Tap /Auto BPM button
Tap along with the music to enter manual BPM values for use with FX & Auto Loop. This is generally used to
manually calculate BPMs when the Auto BPM function is unable to lock onto a consistent beat. You must tap at
least four times in order for a calculation to occur, and the calculation will only be as accurate as your tapping.
13. Play/Pause button
Each press of the button to change from play to pause or from pause to play
14. Cue button
A Cue Point is self-defined starting point, usually at the beginning of a beat. Pressing the CUE button during
playback immediately pause playback and returns the tracks to the last set cue point. By pressing and holding
the CUE button you will return to play mode until you release the button again. The player will then returns to the
cue point and go into pause mode.
15. Cue Play button
Press the button to return to cue point and playing immediately. You can also tap the button to create a BOP
effect.
16. Jog Wheel
This touch-sensitive wheel has multiple functions:
1) Frame Search - The JOG WHEEL will act as a frame search control when the track in the pause or cue mode
(without vinyl mode engaged), allowing you to set a point.
2) Pitch Bend - During CDJ mode playback, the WHEEL also works as a pitch bend during playback, similar to
a “push” or a “drag” on a turntable. Turning the WHEEL clockwise will increase the pitch
percentage up to 100%, and turning the WHEEL counterclockwise will decrease the pitch
percentage down to -100%. The pitch bend will be determined on how long you turn the JOG
WHEEL continuously.
3) Vinyl Simulation - When in VINYL mode, the top platter acts just like a vinyl turntable, moving the playback
position forward or back in response to your movements. The outer JOG WHEEL still
performs the pitch bend function.
4) Effects Parameter Adjustment - The jog wheel can be used with pressing the X Parameter (TIME)
button
or Y Parameter (DEPTH)
button to set effects parameter adjustment.
To Next Page
Loading...