S60
57
ENGLISH
PART NAMES AND FUNCTIONS
25. Filter Effect button
This button is used to activate and deactivate the filter effect. The filter effect tweaks the original sound to add
different tonal definition.
To manually change the beat frequency of the effect, press the X parameter (TIME) button
and regulate the
frequency mean of the JOG WHEEL (from 0-9990 mSec.). To influence the intensity of the effect, press the Y
parameter button
and adjust the volume with the JOG WHEEL (from 0-255).
TIP : To create a great filter sweep effect, set the time parameter value to „0“ mSec. and activate
„Hold“
. Use the parameter DEPTH button and the JOG WHEEL to infinitely filter the frequency
of your track from the value „0“ (High Pass Filter) to the value of „255“ (Low Pass Filter).
26. Skid Effect button
This button is used to activate and deactivate the SKID effect. This effect to simulate traditional vinyl turntable
turn on and turn off sound effect. You can adjust X parameter to determines the acceleration speed until
full playback speed is reached when the Play/Pause button is pressed. You also can adjust Y parameter to
determine the deceleration speed until play stops when the Play/Pause button is pressed.
27. Y Parameter (Depth) and Increase Beat Sync button
This button is used to adjust the Y parameter (DEPTH) value. You can push the button and turn the JOG WHEEL
to adjust the parameter value. In FX Auto Beat Sync mode, press this button to increase beat sync.
28. Jog Wheel “A.CUE” Mode button
This button is used to switch JOG WHEEL mode to Auto Cue Scratch (A. CUE) Mode. While in playback mode
the JOG WHEEL can be used to return the unit to last in point. Simply touch the surface of the JOG WHEEL and
unit will immediately return to the last set cue point and playback without music interruption. While in cue mode
and when the touch sensitivity function is active, tapping on the JOG WHEEL can be used to start playback.
The unit will continue to playback until the JOG WHEEL is released. Once the JOG WHEEL is released the unit
will return to the last in point.
29. Jog Wheel “Vinyl” Mode button
When the mode is set to VINYL, during playback, touch the surface of the JOG WHEEL to activate the scratch
effect.
30. Jog Wheel “CDJ” Mode button
When wheel mode is set to CDJ, scratch mode is exit, JOG WHEEL can be used as pitch bend and frame
search.
31. Time Display Mode Switch button
The button will switch the time display mode in the Time Mode Indicator between ELAPSED playing time and
TRACK Remaining time.
32. SGL/CTN Switch button
This function allows you to switch single track play or continuous track play (all tracks in order). With this button
you can also switch AUTO CUE on and off, by pressing it for at least 1 second.
To Next Page
Loading...