VTech 15450

59
REMOTE ACCEss CODE
A two-digit security code is required to access the
answering machine remotely from any touch-tone
telephone. The preset code is 00. You can set the code
from 00 to 99.
Press
when idle.
Press
or to scroll to Answering sys, then presss
.
Press
or to scroll to Ans sys setup, then press
.
Press
or to scroll to Remote code, then press
.
Enter a two-digit number, then press
.
MEssAGE ALERT TONE
When the message alert tone is set to On, and there is at
least one new message, the telephone base beeps every
10 seconds. The message alert tone is preset to Off.
There is no audible alert at the handset.
Press
when idle.
Press
or to scroll to Answering sys, then presss
.
Press
or to scroll to Ans sys setup, then press
.
Press or to scroll to Msg alert tone, then press
.
Press
or to scroll to On or Off, then press .
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.