41
3. Press SELECT to choose Add device.
4. Press
SELECT to choose Add mobile. The screen
displays 1. If mobile is connected to BT device, pls
disconnect it.
• If there are already 4 paired devices on the device
list, the 4th device will be automatically removed,
regardless of whether the new device pairing is
successful or not
.
5. Press NEXT. The screen displays 2. Place mobile
phone next to base.
• All devices that are connected to the telephone
base are disconnected until the pairing process is
completed.
6. Press NEXT to turn on the telephone base
discoverable mode. The screen displays Set mobile to
search base: VTech 17850 PIN: 0000. Promptly turn on
the MobilConnect feature of your mobile phone and
search for or add new devices.
(VTech 17850), press the appropriate key on your
mobile phone to continue the pairing process.
• Your mobile phone may require a passcode. In this
case, the telephone base displays Check mobile.
ENTER PASS CODE. Enter the mobile phone
passcode (typically 0000) into the telephone base
and press
SET.
• Enter the PIN of the telephone base (the default
PIN is 0000) into your mobile phone to continue
the pairing process if required. The telephone
base displays Adding Mobile phone A....
To Next Page
Loading...
Need help?
General
