VTech 6032 User Manual

www.vtechphones.com
9
Basic operation
Telephone settings
The handset will
not ring when the
ringer volume is at
the lowest setting.
A ringer off icon
will be displayed.
While the
telephone is
ringing, you
can temporarily
silence the ringer
by pressing
OFF/CLEAR
or
MUTE. The ringer
off icon
will
be displayed. The
next call will ring
normally.
•
•
Battery low tone
The handset will beep to alert you when the battery level is low. If you
wish to change this setting:
• Press
MENU/SELECT to display the menu when in idle mode.
• Press
or to reach SETUP HS. Press MENU/SELECT.
• Press
or to reach TONES. Press MENU/SELECT.
• Press
or to reach BATTERY LOW. Press MENU/SELECT.
• A checkmark is shown next to the current selection. Press
or
to choose ON or OFF. Press MENU/SELECT.
• The screen displays STORED
and you’ll hear a conrmation beep (if
KEY TONE is on).
BAtterY low
out of rANGe
oN
off
Ring volume
The handset ringer volume can be adjusted from ve levels.
• Press
MENU/SELECT to display menu when in idle mode.
• Press
or to reach SETUP HS. Press MENU/SELECT.
• Press
or to reach RING VOLUME. Press MENU/SELECT.
• Press
or to scroll through the choices and a sample of each ring
volume will be played. Press MENU/SELECT to conrm.
• The screen displays STORED
and you’ll hear a conrmation beep (if
KEY TONE is on).
toNeS
HANdSet NAMe
Telephone settings
The volume of
the telephone
base ringer is set
separately from
the handset ringer.
See page 28 to set
the telephone base
ringer volume.
•

VTech 6032 Specifications

General

Brand	VTech
Model	6032
Category	Cordless Telephone
Language	English