Answering system operation
The message counter usually displays the total number of incoming messages.
See the list below for explanations of other displays in this window.
Message window displays
0 No messages.
0 (ashing) The clock needs to be set.
1-99 Total number of old message(s) recorded.
1-99 (ashing) Total number of message(s) recorded, at least one is new.
1-99 & F (alternating) Memory is full with total number of messages recorded.
1-90 (counting) Elapsed time while recording an announcement.
1-99 Current message number during message playback.
0-8 Current volume level while adjusting.
02, 04, 06, 08, tS Current number of rings while setting.
-- System is answering a call.
-- (ashing) System is being setup or initialized, or being accessed remotely.
To Next Page
Loading...
Need help?
General
