Telephone operation
Mute
The mute function allows you to hear the other party but
the other party cannot hear you.
During a call, press MUTE/REMOVE on the handset.
The handset screen shows Muted for a few
seconds and
MUTE
appears until the mute function
is turned off.
Press MUTE/REMOVE again to resume the conversation.
The handset screen temporarily shows
Microphone ON.
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the ringer of the
handset or telephone base without disconnecting the call. The next call rings
normally at the preset volume.
To silence the handset ringer:
Press OFF/CLEAR or MUTE/REMOVE on the handset,
Ringer mute and display.
To silence the telephone base ringer:
Press VOL/ on the telephone base to turn off the
base ringer.
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to tone
dialing temporarily during a call. This is useful if you need to send touch-tone
signals to access your telephone banking or long distance services.
During a call:
Press TONE .
The telephone now sends tone signals as you enter numbers.
The telephone automatically returns to pulse dialing mode after you end
the call.
1.
2.
•
•
1.
2.
3.
Muted
3:15PM
MUTE
12/25
Ringer mute
21
To Next Page
Loading...
Need help?
General
