Telephone operation
Find handset
Use this feature to page all system handsets.
Press /FIND HANDSET on the telephone base. All
idle handsets ring and the screens show ** Paging **.
To end paging, press /FLASH, , any dialing
keys (0-9, #, TONE ), or press /FIND HANDSET on
the telephone base.
Call waiting
When you subscribe to call waiting service from your telephone service
provider, you hear an alert tone if there is an incoming call while you are on
another call.
Press /FLASH to put your current call on hold and take the new call. Press
/FLASH at any time to switch back and forth between calls.
Equalizer
The equalizer feature on the handset enables you to
change the audio quality of the handset to best suit
your hearing.
While using the handset, speakerphone, intercom or
listening to a message or announcement, press EQ
to select the equalizer setting Treble 1, Treble 2,
Bass or Natural (the default setting) for the handset.
The current setting is shown on the handset for two seconds.
1.
2.
Paging rings all the registered handsets even if the ringer
volume is set to off.
22
To Next Page
Loading...
Need help?
General
