Telephone operation
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, call log or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as
bank account numbers or access codes) from the directory, call log or
redial list.
To access a number in the directory while on a call:
Press MENU/SELECT and then press / VOL or VOL/CID to highlight
>
Directory.
Press MENU/SELECT and then press / VOL or VOL/CID to scroll to the
desired entry.
Press MENU/SELECT to dial the displayed number.
To access a number in the call log while on a call:
Press MENU/SELECT and then press / VOL or VOL/CID to highlight
>
Call log.
Press MENU/SELECT and then press / VOL or VOL/CID to scroll to the
desired entry.
Press MENU/SELECT to dial the displayed number.
To access a number on the redial list while on a call:
Press REDIAL/PAUSE and then press / VOL or VOL/CID or
REDIAL/PAUSE to browse to the desired entry.
Press MENU/SELECT to dial the displayed number.
1.
2.
3.
1.
2.
3.
1.
2.
You cannot edit a directory entry while on a call. For more details about the
directory, see page 32.
You cannot copy a call log entry into the directory while on a call. For more
details about the call log, see page 38.
You cannot erase a redial entry while on a call. For more details about the redial
memory, see page 24.
Press OFF/CLEAR to exit redial, directory or call log when you are on a call.
•
•
•
•
23
To Next Page
Loading...
Need help?
General
