VTech BM3100 Twin - No Link Alert

Parent unit settings
18
Alert tone
No link alert
You can set whether the parent unit beeps whenever the link
between the parent unit and the baby unit is lost. The no link alert
is preset to On.
To set the no link alert of the parent unit:
Press
MENU when the parent unit is not in use.
Press or to choose ALERT TONE, then press SELECT or .
Press or to choose No Link Alert, then press SELECT or .
Press or to choose On or Off, then press SELECT to conrm your
selection. You hear a conrmation tone.
The no link alert only works while viewing that particular baby unit in
single-CAM mode or in multi-CAM mode.
1.
2.
3.
4.