Parent unit settings
22
Sound-activated screen
When the parent unit screen is turned off manually (see page 27),
you can set the screen to be turned on automatically whenever
there are sounds detected from the baby units after 20 seconds of
silence. The parent unit screen will turn off automatically when no
sounds are detected from the baby units within 50 seconds.
The sound-activated screen is preset to Off.
To turn the sound-activated screen on or off:
Press MENU when the parent unit is not in use.
Press
or to choose SOUND-ACTIVATED SCREEN, then press
SELECT or .
Press or to choose On or Off, then press SELECT to conrm your
selection. You hear a conrmation tone.
If you set the sensitivity level to Level 5 (Maximum) (see page 19), the baby
unit will be very sensitive and detect any sounds including background
noises. These background noises may disrupt the silence and prevent the
sound-activated screen feature to work properly.
The parent unit will turn on only if the sounds detected are from the last
viewed camera.
LCD brightness
You can change the brightness of the parent unit screen from
Level 1 to Level 5. The LCD brightness is preset to Level 3.
To set the brightness of the parent unit screen:
Press MENU when the parent unit is not in use.
Press
or to choose LCD BRIGHTNESS, then press SELECT or .
Press or to choose the desirable brightness.
Press SELECT to conrm your selection. You hear a conrmation tone.
1.
2.
3.
•
•
1.
2.
3.
4.
To Next Page
Loading...
Need help?
General
