29
Dim Mode
Dim mode helps you save parent unit power. When your parent unit is not
charging, the display will automatically dim after 10 minutes of inactivity if no keys
are pressed or alerts are received from the baby unit.
10 min inactivity
Press any button
Night Vision
The baby unit has infrared LEDs that allow you to see your baby clearly at night
or in a dark room. When the baby unit being viewed detects low light levels, the
infrared LEDs are switched on automatically. The images from the baby unit are in
black and white, and appears on the screen.
Notes:
• It is normal to see a short white glare on your
parent unit screen when the baby unit adapts to
the dark environment.
• When the infrared LEDs are on, it is normal for
the images to be in black and white.
Tip:
Depending on the surroundings and
other interfering factors, for example, lighting,
objects,colours and backgrounds, the image
quality may vary. Adjust the baby unit angle or
place the baby unit at a higher location to prevent
glare and a blurred display.
To Next Page
Loading...
