VTech CS5129-2 User Manual

19
Delete the caller ID log entries
1. When in the caller ID log, press q or
p to browse.
2. When the desired caller ID log
entry displays, press DELETE. The
handset displays Deleting.... Then
you hear a confirmation tone.
To delete all caller ID log entries:
1. Press MENU when the phone is not
in use.
2. Press q or p to select Caller ID log
and then press SELECT.
3. Press q or p to
select Delete all
then press SELECT.
4. The screen displays
Delete all?. Press
SELECT to confirm.
The handset
displays Deleting...
and then you hear a
confirmation tone.
Call block
If you have subscribed to caller ID
service, you can set the telephone
to block unknown calls and certain
undesired calls. The call block list can
store up to 20 entries.
When a call is blocked, the caller will
hear a simulated busy tone for one ring
cycle. The call recipient may pick up the
call during the first ring when there is no
caller ID information. Otherwise, the call
is disconnected.
Block unknown calls
All incoming calls with unknown numbers
will be blocked.
1. Press MENU when the phone is not
in use.
2. Press q or p to select Call block
and then press SELECT.
3. Press q or p to select Calls w/o
num then press SELECT.
4. Press q or p to choose Unblock
or Block, then press SELECT. You
hear a confirmation tone.
Add a call block list entry
1. Press MENU when the phone is not
in use.
2. Press q or p to select Call block
and then press SELECT.
3. Press SELECT to choose Block list.
4. Press q or p to select Add new
entry then press SELECT.
5. When Enter number displays, use
the dialing keys to enter the number.
-OR-
Copy a number from the redial list by
pressing REDIAL and then press q,
p or REDIAL repeatedly to select a
number. Press SELECT to copy the
number.
Delete all
ECO
ANS ON
p
q
Delete all?
ECO
ANS ON

VTech CS5129-2 Specifications

General

Brand	VTech
Model	CS5129-2
Category	Cordless Telephone
Language	English