VTech CS6114-11 User Manual

9
Join a call in progress (for
multiple handset models only)
You can use three handsets at a time on
an outside call.
• When a handset is already on a call,
press on another handset to join
the call.
• To exit the call, press OFF on the
handset or place it in the telephone
base or charger. The call continues
until all handsets hang up.
Call waiting
When you subscribe to call waiting
service from your telephone service
provider, you hear an alert tone if there
is an incoming call while you are already
on a call.
• Press FLASH to put the current call on
hold and take the new call.
• Press FLASH at any time to switch
back and forth between calls.
If you also subscribe to caller ID
service, it will let you see the name and
telephone number of the caller during
call waiting.
It may be necessary to change your
telephone service to use this feature.
Contact your telephone service provide if:
• You have both caller ID and call
waiting, but as separate service (you
may need to combine these service);
• You have only caller ID service, or
only call waiting service; or
• You do not subscribe to caller ID or
call waiting services.
There are fees for caller ID services. In
addition, services may not be available in
all areas.
Chain dialing
Use this feature to initiate a dialing
sequence from numbers stored in the
directory, caller ID log or redial while you
are on a call.
Chain dialing can be useful if you wish
to access other numbers (such as bank
account numbers or access codes) from
the directory, caller ID log or redial list.
To access a number in the
directory while on a call:
1. Press MENU/SELECT twice to enter
the directory.
2. Press q or p to scroll to the desired
entry.
3. Press SELECT to dial the displayed
number.
To access a number in the caller
ID log while on a call:
1. Press MENU and then press q or p
to select Caller ID log.
2. Press SELECT and then press q or
p to scroll to the desired entry.
3. Press SELECT to dial the displayed
number.
To access a number in the redial
list while on a call:
1. Press REDIAL.
2. Press q, p or REDIAL repeatedly to
browse to the desired entry.
3. Press SELECT to dial the displayed
number.

VTech CS6114-11 Specifications

General

Brand	VTech
Model	CS6114-11
Category	Cordless Telephone
Language	English