VTech CS6114 A User Manual

7
Directory
The directory can store up to 30 entries.
Each handset directory is independent (for models CS6114-2/CS6114-2 A/
CS6114-21/CS6114-21A only). Any additions, deletions or edits made on
one handset are not reflected on the other handset.
To add a directory entry:
Press MENU/SELECT three times when the handset is not in use.
2. When the screen displays Enter number:
Use the dialing keys to enter the number (up to 30 digits).
-OR-
Copy a number from the redial list by pressing REDIAL/
PAUSE and
then press
CID, or REDIAL/PAUSE repeatedly to select a
number. Press
MENU/SELECT to copy the number.
Press
MENU/SELECT to move to the name.
When the screen displays Enter name, u
se the dialing keys to enter
the name (up to 15 characters). Additional key presses show other
characters of that particular key.
Press
MENU/SELECT to store the entry.
While entering names and numbers, you can:
Press
MUTE/DELETE to backspace and erase a digit or character.
Press and hold
MUTE/DELETE to erase the entire entry.
Press
CID or to move the cursor to the left or right.
Press and hold
REDIAL/PAUSE to insert a dialing pause.
Press 0 to add a space.
To review and dial from the directory:
Entries are sorted alphabetically.
Press
when the handset is not in use.
Scroll to browse through the directory, or use the dialing keys to start a
name search.
When the desired entry appears, press /FLASH to dial.
To edit a directory entry:
When the desired entry displays, press
MENU/SELECT.
When the screen displays Edit number, use the dialing keys to edit.
Press
MENU/SELECT.
When the screen displays Edit name, use the dialing keys to edit.
Press
MENU/SELECT to confirm.
To delete a directory entry:
When the desired entry displays, press
MUTE/DELETE.
When the screen displays Delete contact?, press
MENU/SELECT.
Caller ID
This product supports caller ID services provided by most telephone
service providers. Depending on your service subscription, you may see
the caller’s name, number, date and time of calls that are sent by your
telephone service provider after the fi rst or second ring.
1.
•
•
3.
4.
5.
•
•
•
•
•
1.
2.
3.
1.
2.
3.
4.
5.
1.
2.
Find handset
Use this feature to find all system handsets.
To start paging:
Press
/FIND HANDSET on the telephone base
once and then release when the telephone is
not in use. All idle handsets ring and
**
Paging
**
flashes on the screens.
To end paging:
Press
/FIND HANDSET on the telephone
base once and then release.
-OR-
Press
/FLASH or any of the dialing keys (0-9, TONE or #) on the
handset to stop the paging tone.
•
•
•
Do not press and hold /FIND HANDSET for more than four seconds. It may
lead to handset deregistration. If Not registered displays on the handset,
refer to Troubleshooting to register the handset to the telephone base.

VTech CS6114 A Specifications

Frequency

Transmit frequency (Handset)	1921.536-1928.448 MHz
Transmit frequency (Telephone base)	1921.536-1928.448 MHz
Channels	5

Power Requirements

Handset battery voltage	2.4V Ni-MH
Telephone base power	6V AC @ 300mA
Charger power	6V AC @ 300 mA

Memory

Handset directory memory locations	30
Handset directory digits	up to 30 digits
Handset directory characters	up to 15 characters