Make a call
Press /FLASH and then use the dialing
keys (0-9) to dial the telephone number.
Predial a call
Enter the telephone number using the dialing
keys (0-9), then press /FLASH to dial.
Answer a call
Press /FLASH or any of the dialing keys (0-9, TONE or #).
End a call
Press OFF/CANCEL or put the handset to the telephone base.
Volume
During a call, press CID/VOL
-
or /VOL
+
to
adjust the listening volume.
Mute
The mute function allows you to hear the other party
but the other party cannot hear you.
During a call, press MUTE/DELETE on the handset.
The handset screen displays Muted until the mute
function is turned off.
Press MUTE/DELETE again to resume the
conversation. The handset screen temporarily
displays Microphone on.
Call waiting
When you subscribe to call waiting service from your
telephone service provider, you hear an alert tone if
there is an incoming call while you are on another call.
Press /FLASH to put the current call on hold
and take the new call.
Press /FLASH at any time to switch back and
forth between calls.
•
•
•
•
•
1.
2.
•
•
The screen shows the elapsed time as you talk (in hours, minutes
and seconds).
When predialing (preview numbers before dialing), press MUTE/DELETE
or OFF/CANCEL to backspace and delete; press and hold REDIAL/PAUSE
to insert a dialing pause (a P appears).
If the handset is moved out of range while on a call, it will beep
three times.
•
•
•
Muted
10:15 PM
12/25
Telephone operation
To Next Page
Need help?
Frequency
Power
Memory
Weight and Dimensions
