Telephone operation
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, call log or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such
as bank account numbers or access codes) from the directory, call log or
redial list.
To access a number in the directory while on a call:
Press MENU/SELECT twice to enter the directory.
Press CID or to scroll to the desired entry.
Press MENU/SELECT to dial the displayed number.
To access a number in the call log while on a call:
Press MENU/SELECT and then press CID or to select Call log.
Press MENU/SELECT and then press CID or to scroll to the
desired entry.
Press MENU/SELECT to dial the displayed number.
To access a number in the redial list while on a call:
Press REDIAL/PAUSE.
Press CID, or REDIAL/PAUSE repeatedly to browse to the
desired entry.
Press MENU/SELECT to dial the displayed number.
Redial list
The telephone stores the ve most recently dialed numbers.
When there are already ve entries, the oldest entry is deleted to make
room for the new entry.
Entries are shown in reverse chronological order.
Review the redial list
Press REDIAL/PAUSE when the handset is not
in use.
Press CID, or REDIAL/PAUSE repeatedly to
browse the redial list.
1.
2.
3.
1.
2.
3.
1.
2.
3.
•
•
1.
2.
You cannot edit a directory entry while on a call. For more details about the
directory, see page 14.
You cannot copy a call log entry into the directory while on a call. For more
details about the call log, see page 19.
You cannot erase a redial entry while on a call. See below for more details
about the redial memory.
Press OFF/CANCEL to exit redial, directory or call log when you are on
a call.
•
•
•
•
To Next Page
Loading...
Need help?
Frequency
Power
Memory
Weight and Dimensions
