VTech CS6429-2 User Manual

23
Call transfer using intercom (continued)
From this intercom call, you have the following options:
You can let the destination handset join you on the outside call in a
three-way conversation. Press and hold INT on the originating handset.
You can transfer the call. Press OFF/CANCEL, or place your handset back in
the telephone base or charger. Your handset shows
CALL TRANSFERRED. The destination handset is then connected to the
outside call.
You can press INT to switch between the outside call (OUTSIDE CALL
displays) and the intercom call (INTERCOM displays).
The destination handset can end the intercom call by pressing
OFF/CANCEL, or by placing the handset back in the telephone base or
charger. The outside call continues with the original system handset.
3.
•
•
•
•
Telephone operation

VTech CS6429-2 Specifications

Frequency and Channels

transmit frequency handset	1921.536-1928.448 MHz
transmit frequency telephone base	1921.536-1928.448 MHz
channels	5

Power Requirements

handset battery	2.4V Ni-MH battery
telephone base power	6V DC @ 400mA
charger power	6V AC @ 300mA

Memory

handset directory memory locations	50 memory locations
handset directory digits capacity	up to 30 digits
handset directory characters capacity	15 characters