VTech CS6429-2 User Manual

32
Missed call indicator
When there are calls that have not been reviewed, the idle handset shows
XX MISSED CALLS.
Each time you review a call log entry marked NEW, the number of missed calls
decrease by one.
When you have reviewed all the missed calls, the missed calls indicator no
longer shows.
If you do not want to review the missed calls one by one, press and hold
OFF/CANCEL on an idle handset to erase the missed call indicator. All entries
are then considered old and kept in the call log.
Memory match
When the incoming telephone number matches the last seven digits of a
telephone number in your directory, the screen displays the stored name of the
directory entry.
For example, if Linda Jones calls, her name appears as Linda if this is how you
entered into your directory.
Review and dial from the call log
When a handset is in idle mode, press CID to review the call log in reverse
chronological order.
-OR-
Press MENU/SELECT. Press or to scroll to >CALL LOG, then press
MENU/SELECT twice.
Press or to browse.
Press /FLASH or to dial the displayed telephone number from the call log.
1.
2.
3.
The number shown in the call log is in the format sent by the telephone service
provider. The telephone service provider usually delivers ten-digit telephone
numbers (area code plus telephone number). If the last seven digits of the
incoming telephone number does not match a number in your directory, the
name appears as it is delivered by the telephone service provider.
The number shown in the call log is in the format sent by the telephone service
provider. The telephone service provider usually delivers ten-digit telephone
numbers (area code plus telephone number). If the last seven digits of the
incoming telephone number does not match a number in your directory, the
name appears as it is delivered by the telephone service provider.
Caller ID

VTech CS6429-2 Specifications

Frequency and Channels

transmit frequency handset	1921.536-1928.448 MHz
transmit frequency telephone base	1921.536-1928.448 MHz
channels	5

Power Requirements

handset battery	2.4V Ni-MH battery
telephone base power	6V DC @ 400mA
charger power	6V AC @ 300mA

Memory

handset directory memory locations	50 memory locations
handset directory digits capacity	up to 30 digits
handset directory characters capacity	15 characters