VTech CS6429-2 User Manual

45
Message window displays
The message window on the telephone base displays the total number of
messages. See the table below for other message window displays.
When the memory is full, the answering system answers incoming calls after 10
rings and announces, “Memory is full. Enter your remote access code.”
When the memory is full, the answering system answers incoming calls after 10
rings and announces, “Memory is full. Enter your remote access code.”
Window display Description
0
No messages.
1-99
The total number of old messages recorded.
The current message number during old message playback.
0-99 (flashing)
When time and date are not set, it flashes the total number
of new messages recorded, or the total number of old
messages recorded.
The telephone base may have lost and regained power. The
clock needs to be set.
1-99 & F (alternating)
The answering system memory is full with total number of
messages recorded.
1-8
The telephone base speaker volume level while adjusting.
0-6
The telephone base ringer level while adjusting.
- -
The answering system is being programmed by a
system handset.
The answering system is answering a call, or recording a
memo or announcement.
The answering system is being accessed remotely.
Answering system operation

VTech CS6429-2 Specifications

Frequency and Channels

transmit frequency handset	1921.536-1928.448 MHz
transmit frequency telephone base	1921.536-1928.448 MHz
channels	5

Power Requirements

handset battery	2.4V Ni-MH battery
telephone base power	6V DC @ 400mA
charger power	6V AC @ 300mA

Memory

handset directory memory locations	50 memory locations
handset directory digits capacity	up to 30 digits
handset directory characters capacity	15 characters